iPV3 Li 165W (OUT OF STOCK)

iPV3 Li 165W

$119.99 CAD
Like 0

The IPV3-Li is the latest device from Pioneer4you, not only does it have a huge 165 watt power output that can be upgraded to 200 watts via a firmware upgrade. Output wattage is adjustable from 10 to 165 watts in 0.1 watt increments an output range of 5 Joules to 50 Joules when using temperature control. The temperature control cut off can be set between 200F to 580F or 100C to 300C.

When using Kanthal wire the IPV3-Li can handle atomizers with resistance levels between 0.1ohms and 3.0ohms, when using nickel wire for temperature control its range is between 0.12ohms and 1.0ohms.

Safety Features include, low voltage protection, low resistance protection, high Input voltage warning, output short circuit protection, reverse battery protection and temperature overheat protection.

The iPv3 Li box mod requires 2 x 18650 batteries, 20A-30A quality batteries are recommended depending on how you plan to use the device. Please take a moment and educate yourself on battery safety with any low ohm coils and high watt devices. Low ohm atomizer builds can be dangerous if proper batteries are not used.
IPV Li 165W Features:
510 Threaded  
Wattage: 7w - 165w  
Atomizer Resistance: 0.10ohm - 3.0ohm  
Aluminum Body  
Redesigned internals  
Uses two 18650 batteries  
Yihi SX330-V3Si Upgradeable chip  
165 watts upgradeable to 200 watts with a later firmware update  
Touch sensor functionality  
Magnetic battery compartment door  


Warranty: GR Good to Go warranty. If this electronic device fails within 1 month of package receipt its replacement is covered by us, just pay the associated shipping costs. Beyond 1 month of package receipt the manufacturers warranty may still apply.
Product Availability:
noStock.png

Black
+
-
CLOSE WINDOW X

What are GR tailor made tobaccos?

We handmade your eliquid on a made to order basis allowing you to select the composition, strength and quantity you wish

Additive:
Select from various additives to jazz up your tobacco should you find yourself in a nut. Two strengths of menthol and cloves are available from the menu for all tobaccos, other flavors vary by what we think goes good together.

Strength:
Select the strength of nicotine you would like.

Filter:
Select the % of overall flavoring used in your tobacco blend of choice. Standard id the original flavoring %for each blend, the filterless is 200%, the light is 50% and extra light is 25%.

Serving:
Select the volume of liquid you would like.

Base:
Select the base composition of the eliquid. PG is Propylene Glycol, VG is Vegetable Glycerine, PEG400 is Polyethylene Glycol 400.

Quantity
Select the number of bottels you would like.

CLOSE WINDOW X

Helpful tips for the wondering fellow!

Brewed the old way
Looking for the originl blend? Go with the choices shown in bold green in each of the options covered below.

Additive (none)
If this is your first time you may want to choose none untill you have sampled the base blend itself. If your a menthol or cloves fan we recommend starting with thr light options.

Strength
16mg-24mg is the most commonly vaped range.

Filter (standard 100%)
Start with the standard (100%) if it is your first time. We do generally flavor our tobaccos on the stronger side so if you prefer a lighter tobacco taste consider the light (50%) or extra light (25%) filter.

Serving
If you are unsure of your choices go with the 5ml sampler!

Base (70% PG, 30% VG)
PG/VG is most common. Go with VG if throat hit and flavor are less important to you than visible vapor. PEG400 offers substantially lower viscosity than VG without the irritant properties associated with PG while also maitaining a good amount of flavor.