Cloupor ZNA 50W

Cloupor ZNA 50W

$89.99 CAD
Like 0

A much more affordable version the ZNA 50W mod, the Cloupor ZNA 50W mod is small, light and durable. The ZNA 50W from Cloupor is made from stainless steel and aluminum, comes with an 18500 and 18650 tube. It's variable wattage from 7 – 50 watts in 0.1 watt increments and can power atomizers with loads from 0.3 to 3.3 ohms. The OLED screen on the side of the device displays power output in watts, battery power level, atomizer resistance level in ohms, and voltage.

Package includes ZNA 50W from Cloupor, two battery tubes (18650 & 18500), extra screws and screwdriver.

The Cloupor ZNA 50 requires 1 x 18650 battery or 1x 18500 battery, 20A-30A quality batteries are recommended depending on how you plan to use it. Please take a moment and educate yourself on battery safety with any low ohm coils and high watt devices. Low ohm atomizer builds can be dangerous if proper batteries are not used.
Cloupor ZNA 50W Features:
Chip is 100% designed by cloupor  
510 threaded connector
 
Adjustable 510 center pin
 
Variable Wattage from 7W-50W in .1 watt increment
 
OLED display shows battery level, watts, volts and ohms
 
Compatible with 0.3ohm~3.3ohm atomizers
 
Input voltage/current: 3.2-4.3V/1.5-7A
 
Output voltage/current: 3.6-8.5V/10A
 
Reverse polarity protection
 
Auto power down after 15 seconds without operation
 


Warranty: GR Good to Go warranty. If this electronic device fails within 1 month of package receipt its replacement is covered by us, just pay the associated shipping costs. Beyond 1 month of package receipt the manufacturers warranty may still apply.

                           
ELECTROCUTION HAZARD
For your safety we advise against using unprotected batteries with any of our products. All warranties are void if unprotected batteries are used. Suitable configurations of protected batteries are offered in our catalog.
Product Availability:
inStock.png

Stainless Steel
+
-
CLOSE WINDOW X

What are GR tailor made tobaccos?

We handmade your eliquid on a made to order basis allowing you to select the composition, strength and quantity you wish

Additive:
Select from various additives to jazz up your tobacco should you find yourself in a nut. Two strengths of menthol and cloves are available from the menu for all tobaccos, other flavors vary by what we think goes good together.

Strength:
Select the strength of nicotine you would like.

Filter:
Select the % of overall flavoring used in your tobacco blend of choice. Standard id the original flavoring %for each blend, the filterless is 200%, the light is 50% and extra light is 25%.

Serving:
Select the volume of liquid you would like.

Base:
Select the base composition of the eliquid. PG is Propylene Glycol, VG is Vegetable Glycerine, PEG400 is Polyethylene Glycol 400.

Quantity
Select the number of bottels you would like.

CLOSE WINDOW X

Helpful tips for the wondering fellow!

Brewed the old way
Looking for the originl blend? Go with the choices shown in bold green in each of the options covered below.

Additive (none)
If this is your first time you may want to choose none untill you have sampled the base blend itself. If your a menthol or cloves fan we recommend starting with thr light options.

Strength
16mg-24mg is the most commonly vaped range.

Filter (standard 100%)
Start with the standard (100%) if it is your first time. We do generally flavor our tobaccos on the stronger side so if you prefer a lighter tobacco taste consider the light (50%) or extra light (25%) filter.

Serving
If you are unsure of your choices go with the 5ml sampler!

Base (70% PG, 30% VG)
PG/VG is most common. Go with VG if throat hit and flavor are less important to you than visible vapor. PEG400 offers substantially lower viscosity than VG without the irritant properties associated with PG while also maitaining a good amount of flavor.